An advanced ceramic composite for the resurfacing and protection of all  metal surfaces. ARC S2 is a low viscosity  composite that is designed to be spray applied but may also be applied by  roller or brush. ARC S2 is formulated for the resurfacing of metal components subjected to  extreme corrosive or severe fluid flow conditions. It is normally applied at a thickness of 250 microns (10 mils)  per coat.

TECHNICAL DATA

• Dry Temperature Dry (Min/Max)                                                    -20 F (-29C) to 175 F (80 C)
• Wet Temperature (Min/Max)                                                          -20 F (-29C) to 125 F (52 C)
• Flexural Strength - kg/cm2 - Mpa (psi)                                         770 - 75 (11,000)
• Tensile Strength - kg/cm2/Mpa (psi)                                             470 - 47 (6,700)
• Tensile Adhesion - kg/cm2 - Mpa (psi)                                         Greater than 140 - 14 (2,000)
• Water Vapor Permeability (meteric perm-cm - Perms)          5.60E-04
• Salt Fog                                                                                                >20,000 hrs
• Shore D Hardness                                                                             85